Commercial windsock frame assembly kits to suit 12 foot windsocks. Swivel frames to suit 4 foot and 6 foot Wind indicators. All products made in Australia of Stainless Steel.
Commercial Windsock Frame Kits
$280.00 – $525.00 inc GST
Description
Commercial Windsock Frame Kits designed to fit and support the particular Windsock sizes: 4 Foot. 6 Foot. 8 Foot and 12 Foot.
8 Foot And 12 Foot Commercial Windsock Frame Kits
- These Windsock Frames made from 316 grade Stainless Steel. Covered by 25 year warranty.
- The Diameter of the opening of an 8 Foot Commercial Windsock Frame is 24 inches (61 cm).
- The diameter of the opening of a 12 Foot Commercial Windsock Frame is 36 inches (91.5 cm).
- Top and bottom Sealed Ball Bearings are used. Lubrication or other attention should never be required.
- The top bearing is capped with a tight press seal . This ensures protection to the top bearing.
Windsock Swivel Frame Kit
Windsock Swivel Frame Kit
4 Foot and 6 Foot Commercial Windsock Frame Kits
4 Foot Windsock Frame Kit comes in a flatpack kit.
The Stainless Steel frame consists of five parts.
1. A Swivel Head tube which allows the assembled frame to turn 360 degrees.
2. The main supporting shaft has a channel machined near the top employing a grub screw. This prevents updraft from lifting the frame and windsock off
3. The solid connecting plate.
4. The two half circular frames that attach to the connecting plate forming the ring that holds the windsock.
5. The bolts and washers that holds everything together.
The ring diameter for this windsock is 14 inches (35.5 cm).
The windsock is attached to the ring with cable ties.
4 foot windsock frame kit
6 Foot Windsock Frame Kit
The Stainless Steel frame consists of five parts.
1. A Swivel Head tube which allows the assembled frame to turn 360 degrees.
2. The main supporting shaft (in two parts one fitting inside the other).
3. The solid connecting plate.
4. The two half circular frames that attach to the connecting plate forming the ring that holds the windsock.
5. The bolts and washers that holds everything together.
This main supporting shaft has a channel cut towards the top end. This channel allows a grub screw to prevent the wind lifting the swivel head from the main shaft.
The ring diameter for this windsock is 18 inches (46 cm).
The windsock is attached to the ring with cable ties..
Windsock Frame Kit
Use postage calculator to establish delivery cost
Additional information
| Weight | 0.30 kg |
|---|---|
| Dimensions | 30 × 7 × 7 cm |
| Wind Sock Frame Size | 4 Foot, 6 Foot, 8 Foot, 12 Foot |
| Welding Base Adaptor | No, Yes (+$38.50) |
