The Cow Girl Weathervane celebrates those gutsy women who hold their own whether it’s wrangling or riding. branding or whatever else needs to be done. Without fear, without favour, doing their best, amongst the best. This Stainless Steel weathervane is Australian made and will give years and years of trouble free service. There is a built in ball bearing that ensures the slightest breeze to cause movement. This cowgirl on her trusty steed will faithfully face into the wind no matter which direction it comes from (as every working weathervane does).
The height of the Cow Girl on her horse is 295mm and the measurement from nose to tail is320mm. The arrow is the standard length of 695mm while the directional measure 590mm. Over all the height is 725mm.
There are some attaching fittings available. The stainless steel mounting plate has been Laser cut to allow it to be bent to the pitch of a metal roof however if your roof is tiled you will need to purchase the stainless steel Gable bracket with a longer shaft to allow fixing to the face of the Gable. Or you can choose to make your own arrangement and choose the “No Mounting Bracket” option.
Which one to use ?
Which one ?
Gable Bracket (Stainless Steel) is used for attaching to the face of the Gable. Suitable for both Tile and Metal Roofs. Because the shaft extends down the face of the Gable, it is 200mm longer than the ridge line bracket.
Stainless Steel Mounting Plate (supplied flat with laser cut slots to allow plate to be bent to the exact pitch of the roof). Used on the roof ridge of metal roofs. Also adaptable to flat surfaces and mounting on posts.
No Mounting Bracket when only the Weathervane is required. Purchasing the suitable bracket makes installation easy and enjoyable