Australian Made, Lifetime warranty against discolouration
This is the “Real Deal” for people who are serious about measuring rainfall.
Checking the Rain Gauge………..
This quality “RainMax Rain Gauge” has a capacity of up to 280mm of rain.
Measuring The rainfall is easy, just follow these 5 steps :
1, Remove the catchment funnel and lift out inner cylinder which holds up to 25mm of water.
2, If this measures less than 25mm, take the reading off the mm scale and record the result.
3, If the rainfall has exceeded 25mm, the water will overflow into the outer cylinder. To measure this volume, carefully pour this water into the 25mm cylinder,
as often as is necessary, counting the number of times and finally measuring the balance in mm.
eg. 4 measures (including the already full inner cylinder) = 100mm + 13mm balance = 113mm of rain.
4, The water may be emptied into a measuring jug so that the volume can be rechecked.
5, Reassemble the RainMax Rain Gauge.
• Quick and easy to install. Installation : simple instructions, easy to do.